JDL-116 Differential pressure switch, 250…5000Pa – Alre
Montaj aparatı J Z-10.
- Stok kontrolü yapmak için Whatsapp Üzerinden iletişime geçiniz.
Açıklama
Technical data
| number of outputs | 2 |
| number of control ranges | 1 |
| output signal | switching |
| operation | internal setpoint adjuster |
| operating voltage | none |
| width | 76mm |
| pressure connection | 6,2mm |
| switching difference | approx. 60…150 Pa |
| electric connection | screw terminals |
| electronic version | No |
| with explosion protection | No |
| colour | black |
| sensor element | pressure membrane |
| function type (systems engineering) | monitor |
| height | 93mm |
| internal setting | Yes |
| bearing temperature, upper value | 80°C |
| bearing temperature, lower value | -15°C |
| maximum air humidity (non-condensing) | 95% r.H |
| housing material | plastic |
| maximum switching voltage | 230 V AC , 50 Hz / 24 V DC |
| maximum switching current | 5 (1) A AC, 1 (0,2) A DC |
| medium | air, not aggressive |
| medium temperature | 80°C |
| medium temperature | -15°C |
| minimum switching voltage | 12 V AC, 50 Hz 12 V DC |
| minimum switching current | 1 mA |
| mounting / attachment | wall mounting |
| surface properties | matt |
| control range, pressure (upper value) | 5000Pa |
| control range, pressure (lower value) | 250Pa |
| control function, overpressure or underpressure | Yes |
| switching element | microswitch |
| switching contact | two-way contact |
| potential free switching contact | Yes |
| switching power | 1150 WAC, 24 WDC |
| type of protection | IP54 |
| protection class | II, following appropriate mounting |
| Safety and EMC | in accordance with DIN EN 60730 |
| depth | 63mm |
| ambient temperature, upper value | 80°C |
| ambient temperature, lower value | -15°C |
| degree of contamination | 2 |
| Circuit diagram |  |
Değerlendirme yazabilmek için oturum açmalısınız.
Değerlendirmeler
Henüz değerlendirme yapılmadı.